So, for a 30-inch-high sump basin, dig down 34 inches. 5. Add Sump Basin. Use a jigsaw or reciprocating saw to cut out the knockouts in the side or bottom of the sump basin. Some sump basins are ...

Break up the basement floor to create a hole for the sump pump basin. This Old House/YouTube. Step No. 2: Wrap the outside of the basin with filter fabric (shown in photo below) ...

If solids in the sump basin could pass through the sump pump, a semi-solid sump/light effluent pump should be considered. A sump/effluent pump with a ½ inch or less solids handling capability is ...

Catch basin; a.k.a., storm drain inlet or curb inlet, is defined as an inlet to the storm drain system that typically includes a grate or curb inlet where storm water enters the catch basin and a s… ...

The sump pump is hidden inside a submerged pit called a sump basin. Sump basins can be too small. A builder may use a simple 5-gallon bucket as an inexpensive sump basin.

Sump pumps are subterranean and are typically placed in a constructed pit (also called a “basin”) below your floor. Water drains into and collects in this pit, and then is pumped back out.

To connect to the drain tile, a 4 1/2-in.-dia. hole is standard and is generally placed 10 1/2 in. below the top of the basin. How far can a sump pump push water up from the sump pit?